Home About Us Products Clients Contact Us

 

2 Solvent  Low Pressure Gtadient HPLC System

MODEL IS 3003 Microprocess Control Unit


I. 2 Solvent gradient pump  Model IS3003 :


1
.  SPECIFICATION
a. Operating pressure: 0~42MPa (6000 psi) maximum.
b. Flow rate range: 0.1~15ml/min;
c. Flow rate precision: ±1%;
d. Flow rate accuracy: 25ml/368~387s(±3%);
e. Compositional precision:0.5% absolute
f.  Pressure solution: 0.1MPa;
g. Over pressure protection: pump shuts off if pressure exceeds limit specified by user-42.0 MPa(6000 psi) maximum.

2.
 Environment
a.Temperature requirements: ambient temperature range 10 to 35℃
b. Operates in relative humidity from 5% to 80%;
c. Power requirements: 220Vac±5%,
d.Power frequency: 50±0.5Hz (voltage and frequency specified on the tag attached to the power cord)

3.  GENERAL PARAMETERS

a. Power Supply: 400W;
b. Dimensions: 450mm(D)×210mm(W)×390mm(H);
c. Weight: 20kg;

II. 2. IS3001 UV detector
UVIS3001 UV detector is a highly cost-effective UV-variable wavelength UV detector.UVIS3001 UV detector using imported German Heli Shi deuterium lamp, light source stability, baseline noise and drift is very low.UVIS3001 UV detector is widely used in laboratory studies by high performance liquid chromatography, nucleic acid protein detection, protein purification analysis of polymer, the low-pressure chromatography system

Detector performance :

Project

Performance

Lamp life

Deuterium lamp (warranty life 1000Hrs)
Deuterium lamp replacement simple, fast, accurate and reliable location

Wavelength selection

190-700nm (step by 1nm), by setting the keyboard or RS-232

Wavelength Accuracy

± 1 nm

Wavelength repeatability

± 0.5 nm

Bandwidth

± 5.0nm

Absorption range

0.01AU/V-10AU/V (a total of ten files)

Noise

2.5 × 10-5 AU (PP)

Time constant

0.5S

Drift

2.5 × 10-4AU (PP)

Linearity

4 times better than 10

Flow cell volume

10ul volume, optical path 10mm

Size / Weight

High 16cm × W 25cm × depth 36cm, 6kg

Operating voltage

AC 220V ± 10%

Input \ Output

Injection signal control (event), automatic zero adjustment, 10 range to choose from ( 0.01QU-10AU / V)

Sample cell

Standard (10mm optical path, 17ul dead zone), outside the column pool, micro pool, pool and other options can be prepared to meet the user's choice, welcomed the inquiry documents

III.Valco Injector

Through-the-Handle Continuous-Flow Injector

  • Eliminates pressure spikes
  • 1/16" fittings, 0.25 or 0.40 mm bore
  • Low internal volume
  • Integrated position feedback
  • Rated for use up to 5000 psi liquid
  • Sample loop included

General Description

The Model C1CFl-NL is a 6 port external loop injector featuring through-the-handle injection and continuous flow. The continuous flow is accomplished by a special engraving on the stator which maintains pump flow between ports 2 and 3during most of the switching cycle, virtually eliminating pressure spikes. (schematic on reverse side)
Since the handle is intrinsic to the design, all Model C1CFl-NLvalves are manual, with integrated position feedback. The standard Model C1CFl-2006 is equipped with a Nitronic 60(stainless steel) stator and a chemically inert Valcon H(carbon- reinforced PTFE) rotor.
Stainless nuts and ferrules are included, as well as a 20μl sample loop. Other loop sizes are available, but must be ordered separately. We also offer versions with a polymeric stator, for applications requiring a biocompatible metal-free flow path. For low flow rate applications, injectors may be ordered with 0.25 mm bore.

IV. Dual channel chromatography data software with 21CFR
For Technical details please go through our website or www.Peak-ABC.com

V. HPLC Column:  C18 (250 * 4.6 -5u)

VI. HPLC Syringe 25ul :

Please Note:  The  System Does not  Require  Mixture & Degaser.

Isocratic HPLC System

1.IS3002 Pump:

Specifications:

  • Infusion Way : The Volume series dual piston
  • Maximum discharge Pressure : 0-9999 Psi(0-60MPa)
  • Flow range     : 0.001 - 9.999ml/min
  • Flow Precision : ≤0.1%RSD
  • Concentration Gradient Accuracy: ±1%(0%-100%),Water/Acetone)

2. IS3001 UV detector

UVIS3001 UV detector is a highly cost-effective UV-variable wavelength UV detector.UVIS3001 UV detector using imported German Heli Shi deuterium lamp, light source stability, baseline noise and drift is very low.UVIS3001 UV detector is widely used in laboratory studies by high performance liquid chromatography, nucleic acid protein detection, protein purification analysis of polymer, the low-pressure chromatography system

Detector performance :

Project

Performance

Lamp life

Deuterium lamp (warranty life 1000Hrs)
Deuterium lamp replacement simple, fast, accurate and reliable location

Wavelength selection

190-700nm (step by 1nm), by setting the keyboard or RS-232

Wavelength Accuracy

± 1 nm

Wavelength repeatability

± 0.5 nm

Bandwidth

± 5.0nm

Absorption range

0.01AU/V-10AU/V (a total of ten files)

Noise

2.5 × 10-5 AU (PP)

Time constant

0.5S

Drift

2.5 × 10-4AU (PP)

Linearity

4 times better than 10

Flow cell volume

10ul volume, optical path 10mm

Size / Weight

High 16cm × W 25cm × depth 36cm, 6kg

Operating voltage

AC 220V ± 10%

Input \ Output

Injection signal control (event), automatic zero adjustment, 10 range to choose from ( 0.01QU-10AU / V)

Sample cell

Standard (10mm optical path, 17ul dead zone), outside the column pool, micro pool, pool and other options can be prepared to meet the user's choice, welcomed the inquiry documents

3.Valco Injector

Through-the-Handle Continuous-Flow Injector

  • Eliminates pressure spikes
  • 1/16" fittings, 0.25 or 0.40 mm bore
  • Low internal volume
  • Integrated position feedback
  • Rated for use up to 5000 psi liquid
  • Sample loop included


General Description

The Model C1CFl-NL is a 6 port external loop injector featuring through-the-handle injection and continuous flow. The continuous flow is accomplished by a special engraving on the stator which maintains pump flow between ports 2 and 3during most of the switching cycle, virtually eliminating pressure spikes. (schematic on reverse side)

Since the handle is intrinsic to the design, all Model C1CFl-NLvalves are manual, with integrated position feedback. The standard Model C1CFl-2006 is equipped with a Nitronic 60(stainless steel) stator and a chemically inert Valcon H(carbon- reinforced PTFE) rotor.
Stainless nuts and ferrules are included, as well as a 20μl sample loop. Other loop sizes are available, but must be ordered separately. We also offer versions with a polymeric stator, for applications requiring a biocompatible metal-free flow path. For low flow rate applications, injectors may be ordered with 0.25 mm bore.
4. Dual channel chromatography data software with 21CFR (Peak -ABC):  

For Technical details please go through our website or www.Peak-ABC.com

5. HPLC Column:  C18 (250 * 4.6 -5u)

6. HPLC Syringe 25ul

OUR RANGE OF PRODUCTS
HPLC
CHROMATOGRAPHY WORK STATION
UV VISIBLE SPECTROPHOTOMETER
GAS GENERATORS
GAS CHROMATOGRPH

GC COLUMNS & CONSUMABLES
LC COLUMNS & CONSUMABLES
LAB WATER PURIFICATION SYSTEM
SPECIAL GC DECTORS
GAS PURIFICATION SYSTEM
IMPSIL HPLC COLOUM BROCHRE
POLARI METER
Read More....
 
  CONTACT US
   
 

IMPTECH SCIENTIFIC
203 Veena Appartments,
Dharam Karam Road,
Ameerpet, Hyderabad - 500 016
A.P. INDIA.

Tele/Fax:+(91)-(40)-23740443, 23740483
Mobile:+(91)-7569644442, 9848051071


E-mails: sales@impscience.com,
imptechscientific@gmail.com

   
All Copyright Receved By @2009 Powered By Rajendra.